From d53858afb1d36c59f487cc0d4dadf4bcc04e0753 Mon Sep 17 00:00:00 2001
From: Jonny Paton <jonathan.r.paton@googlemail.com>
Date: Mon, 20 Aug 2018 20:09:29 +0100
Subject: [PATCH] Removed incompatible cmake/catch functionality, replaced with
 vanilla cmake

---
 cmake/Catch.cmake         | 175 --------------------------------------
 cmake/CatchAddTests.cmake | 151 --------------------------------
 test/CMakeLists.txt       |   9 +-
 3 files changed, 3 insertions(+), 332 deletions(-)
 delete mode 100644 cmake/Catch.cmake
 delete mode 100644 cmake/CatchAddTests.cmake

diff --git a/cmake/Catch.cmake b/cmake/Catch.cmake
deleted file mode 100644
index 5f76e0cde..000000000
--- a/cmake/Catch.cmake
+++ /dev/null
@@ -1,175 +0,0 @@
-# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
-# file Copyright.txt or https://cmake.org/licensing for details.
-
-#[=======================================================================[.rst:
-Catch
------
-
-This module defines a function to help use the Catch test framework.
-
-The :command:`catch_discover_tests` discovers tests by asking the compiled test
-executable to enumerate its tests.  This does not require CMake to be re-run
-when tests change.  However, it may not work in a cross-compiling environment,
-and setting test properties is less convenient.
-
-This command is intended to replace use of :command:`add_test` to register
-tests, and will create a separate CTest test for each Catch test case.  Note
-that this is in some cases less efficient, as common set-up and tear-down logic
-cannot be shared by multiple test cases executing in the same instance.
-However, it provides more fine-grained pass/fail information to CTest, which is
-usually considered as more beneficial.  By default, the CTest test name is the
-same as the Catch name; see also ``TEST_PREFIX`` and ``TEST_SUFFIX``.
-
-.. command:: catch_discover_tests
-
-  Automatically add tests with CTest by querying the compiled test executable
-  for available tests::
-
-    catch_discover_tests(target
-                         [TEST_SPEC arg1...]
-                         [EXTRA_ARGS arg1...]
-                         [WORKING_DIRECTORY dir]
-                         [TEST_PREFIX prefix]
-                         [TEST_SUFFIX suffix]
-                         [PROPERTIES name1 value1...]
-                         [TEST_LIST var]
-    )
-
-  ``catch_discover_tests`` sets up a post-build command on the test executable
-  that generates the list of tests by parsing the output from running the test
-  with the ``--list-test-names-only`` argument.  This ensures that the full
-  list of tests is obtained.  Since test discovery occurs at build time, it is
-  not necessary to re-run CMake when the list of tests changes.
-  However, it requires that :prop_tgt:`CROSSCOMPILING_EMULATOR` is properly set
-  in order to function in a cross-compiling environment.
-
-  Additionally, setting properties on tests is somewhat less convenient, since
-  the tests are not available at CMake time.  Additional test properties may be
-  assigned to the set of tests as a whole using the ``PROPERTIES`` option.  If
-  more fine-grained test control is needed, custom content may be provided
-  through an external CTest script using the :prop_dir:`TEST_INCLUDE_FILES`
-  directory property.  The set of discovered tests is made accessible to such a
-  script via the ``<target>_TESTS`` variable.
-
-  The options are:
-
-  ``target``
-    Specifies the Catch executable, which must be a known CMake executable
-    target.  CMake will substitute the location of the built executable when
-    running the test.
-
-  ``TEST_SPEC arg1...``
-    Specifies test cases, wildcarded test cases, tags and tag expressions to
-    pass to the Catch executable with the ``--list-test-names-only`` argument.
-
-  ``EXTRA_ARGS arg1...``
-    Any extra arguments to pass on the command line to each test case.
-
-  ``WORKING_DIRECTORY dir``
-    Specifies the directory in which to run the discovered test cases.  If this
-    option is not provided, the current binary directory is used.
-
-  ``TEST_PREFIX prefix``
-    Specifies a ``prefix`` to be prepended to the name of each discovered test
-    case.  This can be useful when the same test executable is being used in
-    multiple calls to ``catch_discover_tests()`` but with different
-    ``TEST_SPEC`` or ``EXTRA_ARGS``.
-
-  ``TEST_SUFFIX suffix``
-    Similar to ``TEST_PREFIX`` except the ``suffix`` is appended to the name of
-    every discovered test case.  Both ``TEST_PREFIX`` and ``TEST_SUFFIX`` may
-    be specified.
-
-  ``PROPERTIES name1 value1...``
-    Specifies additional properties to be set on all tests discovered by this
-    invocation of ``catch_discover_tests``.
-
-  ``TEST_LIST var``
-    Make the list of tests available in the variable ``var``, rather than the
-    default ``<target>_TESTS``.  This can be useful when the same test
-    executable is being used in multiple calls to ``catch_discover_tests()``.
-    Note that this variable is only available in CTest.
-
-#]=======================================================================]
-
-#------------------------------------------------------------------------------
-function(catch_discover_tests TARGET)
-  cmake_parse_arguments(
-    ""
-    ""
-    "TEST_PREFIX;TEST_SUFFIX;WORKING_DIRECTORY;TEST_LIST"
-    "TEST_SPEC;EXTRA_ARGS;PROPERTIES"
-    ${ARGN}
-  )
-
-  if(NOT _WORKING_DIRECTORY)
-    set(_WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}")
-  endif()
-  if(NOT _TEST_LIST)
-    set(_TEST_LIST ${TARGET}_TESTS)
-  endif()
-
-  ## Generate a unique name based on the extra arguments
-  string(SHA1 args_hash "${_TEST_SPEC} ${_EXTRA_ARGS}")
-  string(SUBSTRING ${args_hash} 0 7 args_hash)
-
-  # Define rule to generate test list for aforementioned test executable
-  set(ctest_include_file "${CMAKE_CURRENT_BINARY_DIR}/${TARGET}_include-${args_hash}.cmake")
-  set(ctest_tests_file "${CMAKE_CURRENT_BINARY_DIR}/${TARGET}_tests-${args_hash}.cmake")
-  get_property(crosscompiling_emulator
-    TARGET ${TARGET}
-    PROPERTY CROSSCOMPILING_EMULATOR
-  )
-  add_custom_command(
-    TARGET ${TARGET} POST_BUILD
-    BYPRODUCTS "${ctest_tests_file}"
-    COMMAND "${CMAKE_COMMAND}"
-            -D "TEST_TARGET=${TARGET}"
-            -D "TEST_EXECUTABLE=$<TARGET_FILE:${TARGET}>"
-            -D "TEST_EXECUTOR=${crosscompiling_emulator}"
-            -D "TEST_WORKING_DIR=${_WORKING_DIRECTORY}"
-            -D "TEST_SPEC=${_TEST_SPEC}"
-            -D "TEST_EXTRA_ARGS=${_EXTRA_ARGS}"
-            -D "TEST_PROPERTIES=${_PROPERTIES}"
-            -D "TEST_PREFIX=${_TEST_PREFIX}"
-            -D "TEST_SUFFIX=${_TEST_SUFFIX}"
-            -D "TEST_LIST=${_TEST_LIST}"
-            -D "CTEST_FILE=${ctest_tests_file}"
-            -P "${_CATCH_DISCOVER_TESTS_SCRIPT}"
-    VERBATIM
-  )
-
-  file(WRITE "${ctest_include_file}"
-    "if(EXISTS \"${ctest_tests_file}\")\n"
-    "  include(\"${ctest_tests_file}\")\n"
-    "else()\n"
-    "  add_test(${TARGET}_NOT_BUILT-${args_hash} ${TARGET}_NOT_BUILT-${args_hash})\n"
-    "endif()\n"
-  )
-
-  if(NOT ${CMAKE_VERSION} VERSION_LESS "3.10.0") 
-    # Add discovered tests to directory TEST_INCLUDE_FILES
-    set_property(DIRECTORY
-      APPEND PROPERTY TEST_INCLUDE_FILES "${ctest_include_file}"
-    )
-  else()
-    # Add discovered tests as directory TEST_INCLUDE_FILE if possible
-    get_property(test_include_file_set DIRECTORY PROPERTY TEST_INCLUDE_FILE SET)
-    if (NOT ${test_include_file_set})
-      set_property(DIRECTORY
-        PROPERTY TEST_INCLUDE_FILE "${ctest_include_file}"
-      )
-    else()
-      message(FATAL_ERROR
-        "Cannot set more than one TEST_INCLUDE_FILE"
-      )
-    endif()
-  endif()
-
-endfunction()
-
-###############################################################################
-
-set(_CATCH_DISCOVER_TESTS_SCRIPT
-  ${CMAKE_CURRENT_LIST_DIR}/CatchAddTests.cmake
-)
\ No newline at end of file
diff --git a/cmake/CatchAddTests.cmake b/cmake/CatchAddTests.cmake
deleted file mode 100644
index 4b855ce28..000000000
--- a/cmake/CatchAddTests.cmake
+++ /dev/null
@@ -1,151 +0,0 @@
-# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
-# file Copyright.txt or https://cmake.org/licensing for details.
-
-set(prefix "${TEST_PREFIX}")
-set(suffix "${TEST_SUFFIX}")
-set(spec ${TEST_SPEC})
-set(extra_args ${TEST_EXTRA_ARGS})
-set(properties ${TEST_PROPERTIES})
-set(script)
-set(suite)
-set(tests)
-
-function(add_command NAME)
-  set(_args "")
-  foreach(_arg ${ARGN})
-    if(_arg MATCHES "[^-./:a-zA-Z0-9_]")
-      set(_args "${_args} [==[${_arg}]==]") # form a bracket_argument
-    else()
-      set(_args "${_args} ${_arg}")
-    endif()
-  endforeach()
-  set(script "${script}${NAME}(${_args})\n" PARENT_SCOPE)
-endfunction()
-
-# Run test executable to get list of available tests
-if(NOT EXISTS "${TEST_EXECUTABLE}")
-  message(FATAL_ERROR
-    "Specified test executable '${TEST_EXECUTABLE}' does not exist"
-  )
-endif()
-execute_process(
-  COMMAND ${TEST_EXECUTOR} "${TEST_EXECUTABLE}" ${spec} --list-test-names-only
-  OUTPUT_VARIABLE output
-  RESULT_VARIABLE result
-)
-# Catch --list-test-names-only reports the number of tests, so 0 is... surprising
-if(${result} EQUAL 0)
-  message(WARNING
-    "Test executable '${TEST_EXECUTABLE}' contains no tests!\n"
-  )
-elseif(${result} LESS 0)
-  message(FATAL_ERROR
-    "Error running test executable '${TEST_EXECUTABLE}':\n"
-    "  Result: ${result}\n"
-    "  Output: ${output}\n"
-  )
-endif()
-
-string(REPLACE "\n" ";" output "${output}")
-
-# Parse output
-foreach(line ${output})
-  set(test ${line})
-  # ...and add to script
-  add_command(add_test
-    "${prefix}${test}${suffix}"
-    ${TEST_EXECUTOR}
-    "${TEST_EXECUTABLE}"
-    "${test}"
-    ${extra_args}
-  )
-  add_command(set_tests_properties
-    "${prefix}${test}${suffix}"
-    PROPERTIES
-    WORKING_DIRECTORY "${TEST_WORKING_DIR}"
-    ${properties}
-  )
-  list(APPEND tests "${prefix}${test}${suffix}")
-endforeach()
-
-# Create a list of all discovered tests, which users may use to e.g. set
-# properties on the tests
-add_command(set ${TEST_LIST} ${tests})
-
-# Write CTest script
-file(WRITE "${CTEST_FILE}" "${script}")# Distributed under the OSI-approved BSD 3-Clause License.  See accompanying
-# file Copyright.txt or https://cmake.org/licensing for details.
-
-set(prefix "${TEST_PREFIX}")
-set(suffix "${TEST_SUFFIX}")
-set(spec ${TEST_SPEC})
-set(extra_args ${TEST_EXTRA_ARGS})
-set(properties ${TEST_PROPERTIES})
-set(script)
-set(suite)
-set(tests)
-
-function(add_command NAME)
-  set(_args "")
-  foreach(_arg ${ARGN})
-    if(_arg MATCHES "[^-./:a-zA-Z0-9_]")
-      set(_args "${_args} [==[${_arg}]==]") # form a bracket_argument
-    else()
-      set(_args "${_args} ${_arg}")
-    endif()
-  endforeach()
-  set(script "${script}${NAME}(${_args})\n" PARENT_SCOPE)
-endfunction()
-
-# Run test executable to get list of available tests
-if(NOT EXISTS "${TEST_EXECUTABLE}")
-  message(FATAL_ERROR
-    "Specified test executable '${TEST_EXECUTABLE}' does not exist"
-  )
-endif()
-execute_process(
-  COMMAND ${TEST_EXECUTOR} "${TEST_EXECUTABLE}" ${spec} --list-test-names-only
-  OUTPUT_VARIABLE output
-  RESULT_VARIABLE result
-)
-# Catch --list-test-names-only reports the number of tests, so 0 is... surprising
-if(${result} EQUAL 0)
-  message(WARNING
-    "Test executable '${TEST_EXECUTABLE}' contains no tests!\n"
-  )
-elseif(${result} LESS 0)
-  message(FATAL_ERROR
-    "Error running test executable '${TEST_EXECUTABLE}':\n"
-    "  Result: ${result}\n"
-    "  Output: ${output}\n"
-  )
-endif()
-
-string(REPLACE "\n" ";" output "${output}")
-
-# Parse output
-foreach(line ${output})
-  set(test ${line})
-  # ...and add to script
-  add_command(add_test
-    "${prefix}${test}${suffix}"
-    ${TEST_EXECUTOR}
-    "${TEST_EXECUTABLE}"
-    "${test}"
-    ${extra_args}
-  )
-  add_command(set_tests_properties
-    "${prefix}${test}${suffix}"
-    PROPERTIES
-    WORKING_DIRECTORY "${TEST_WORKING_DIR}"
-    ${properties}
-  )
-  list(APPEND tests "${prefix}${test}${suffix}")
-endforeach()
-
-# Create a list of all discovered tests, which users may use to e.g. set
-# properties on the tests
-add_command(set ${TEST_LIST} ${tests})
-
-# Write CTest script
-file(WRITE "${CTEST_FILE}" "${script}")
\ No newline at end of file
diff --git a/test/CMakeLists.txt b/test/CMakeLists.txt
index beb4b2045..abfe34f2d 100644
--- a/test/CMakeLists.txt
+++ b/test/CMakeLists.txt
@@ -1,6 +1,3 @@
-# Include the extra catch cmake functions
-include("${CMAKE_SOURCE_DIR}/cmake/Catch.cmake")
-
 set(SRCROOT "${PROJECT_SOURCE_DIR}/test/src")
 
 include_directories("${PROJECT_SOURCE_DIR}/include")
@@ -17,7 +14,7 @@ SET(SYSTEM_SRC
 )
 add_executable(systemtest ${SYSTEM_SRC})
 target_link_libraries(systemtest sfml-system)
-catch_discover_tests(systemtest)
+add_test(System-module-tests systemtest)
 
 if(SFML_BUILD_WINDOW)
     SET(WINDOW_SRC
@@ -27,7 +24,7 @@ if(SFML_BUILD_WINDOW)
     )
     add_executable(windowtest ${WINDOW_SRC})
     target_link_libraries(windowtest sfml-window)
-    catch_discover_tests(windowtest)
+    add_test(Window-module-tests windowtest)
 endif()
 
 if(SFML_BUILD_GRAPHICS)
@@ -39,7 +36,7 @@ if(SFML_BUILD_GRAPHICS)
     )
     add_executable(graphicstest ${GRAPHICS_SRC})
     target_link_libraries(graphicstest sfml-graphics)
-    catch_discover_tests(graphicstest)
+    add_test(Graphics-module-tests graphicstest)
 endif()
 
 # Automatically run the tests at the end of the build